Picnic season is here, and what better way to enjoy it than with a perfectly set table on your own patio? Lowe’s offers a convenient and affordable picnic table kit that allows you to build and own your outdoor dining space. Here’s a comprehensive guide to help you through the assembly process with step-by-step instructions.
Before you begin, ensure you have all the necessary tools and parts. The Lowe’s picnic table kit comes with pre-cut and pre-drilled pieces, making it easier to assemble. You’ll need a few common tools, such as a wrench, screwdriver, and mallet for this project.
Understanding the Components
Familiarize yourself with the components of your Lowe’s picnic table kit. The kit includes:
- Two benches (each with 6 boards and 2 supports)
- One table top (8 boards)
- Four support beams
- Eight leg assemblies (each with 1 leg and 1 brace)
- Hardware (screws, washers, and nuts)
Organize these components for easy access during assembly. Keep the instructions handy for reference throughout the process.
Building the Benches
Begin by assembling one of the benches.-slide the support beams into the notched ends of the 6 boards, placing the supports in the middle of the bench. Align the holes in the boards with those in the supports.
Insert the lag screws through the aligned holes, and secure them using the provided washers and nuts. Tighten the screws firmly but be careful not to overtighten and crack the wood. Repeat this process to assemble the second bench.
Assembling the Table Top
Next, create the table top by sliding the 8 boards together, aligning their edges. The kit should come with spacers to ensure consistent gaps between the boards to allow for water drainage.
Once the boards are aligned, secure the table top with screws, washers, and nuts, following the same process as the benches. Ensure that the screws are tight enough to hold the boards securely but not so tight that they crack the wood.
Attaching the Legs and Supports
Now that the benches and table top are assembled, it’s time to attach the legs and supports. Flip each bench upside down, position the table flip it over.
Attaching the Leg Assemblies
Attach the leg assemblies to each corner of the table top. Align the holes in the legs with those in the table top, and secure them using the provided screws, washers, and nuts. Ensure the legs are securely attached and stand firmly on the ground.
For added stability, you can drive stakes into the ground at each leg’s base (not provided in the kit but recommended for heavy-duty use).
Attaching the Bench Supports
Attach the support beams to the benches using the lag screws, washers, and nuts. Position the supports under the bench seats and align the holes in the supports with those in the bench boards. Secure them firmly but be cautious not to overtighten the screws.
Adding the Finishing Touches
Your Lowe’s picnic table kit is now fully assembled! Before inviting guests or setting up for the first big meal, consider adding a few finishing touches to make it truly your own:
- Sand any rough edges or surfaces
- Apply a sealant to protect the wood and make cleaning easier
- Customize with paint or stain, if desired
The perfect picnic table is ready for your garden or patio. Invite friends and family, set the table with your favorite dishes, and enjoy countless memorable meals with your Lowe’s picnic table kit.
Remember, proper maintenance will keep your picnic table in good condition. Clean off any debris, and reapply sealant or paint whenever necessary to protect the wood and prolong its lifespan. Have a fantastic picnic season!
