Are you looking to add a captivating, large-scale artwork or decorative map to your space, but worried about the limitations of nails and hooks? Command Large Picture Hanging Strips might just be the solution you’re looking for. These innovative strips allow you to hang heavy pictures without damaging your walls. Let’s delve into how you can easily and effectively use them.
Firstly, Command Large Picture Hanging Strips are designed to hold up to 16 pounds on most smooth surfaces, making them perfect for your heavy-duty hanging needs. They are also easily removed without leaving marks, a feature hugely beneficial when you’re renting or need to frequently change your displays.
Preparation and Surface Suitability
Before you get started, ensure your surfaces are clean, dry, and free from wax, oil, or residue. The strips work best on smooth surfaces like painted walls, fully cured drywall, and tile.
It’s crucial to note that the strips may struggle on rough, textured, or porous surfaces, as well as those with inadequate drying time, such as fresh paint.
Gathering Your Materials
Before you begin, make sure you have all the necessary materials. This includes your Command Large Picture Hanging Strips, the picture or frame you intend to hang, a measuring tape, a pencil, a level, and a clean, dry cloth or tack cleaner to prep your surface.
Each strip comes with its own backing, making it easy to apply. The strips are designed to be overlapped, so you’ll need to consider this when measuring for your specific frame. If your frame has a hanging wire, measure vertically from the top of the wire to the bottom of the frame; this will give you the height you need to hang it.
Measuring and Leveling
Using your measuring tape and a level, mark where you want to place your hanging strips. Remember that because the strips overlap, you’ll need to account for this width in your measurements. The strips are 12.5 inches long, so for a typical frame, you’ll want to mark your spots 2-3 inches apart, horizontally.
Once your strips are marked, use your level to ensure your measurements are even. This will help you create a balanced, symmetric display.
Applying the Strips
Now that your surface is prepared and you’ve marked your spots, it’s time to apply the strips. Begin by peeling off the protective liner from the adhesive side of the strip. Press the strip firmly against your marked spot, ensuring that it lines up with your measurement.
Press along the strip’s length with your fingers, applying firm and even pressure to ensure a solid bond. Once the strip is applied, allow it to sit for an hour so the adhesive can activate fully.
Hanging Your Picture
After an hour, carefully peel off the protective liner on the front of the strip, where the hook attaches. Pull the hook straight out to remove it, then place it back in, pressing firmly downward and giving it a slight twist to activate the locking mechanism.
Now, hang your picture. Start by placing the top of your picture’s hanging hardware onto the hooks. Carefully slide the picture down onto the strips, ensuring it’s balanced and straight. Use your level to double-check that it’s hanging correctly.
Enjoying Your Display
Once your picture is hung, step back and admire your work. The Command Large Picture Hanging Strips have made it possible for you to display even your largest, heaviest pieces without damage to your walls.
When you’re ready to take the strips down, simply pull them off at a 135-degree angle, quickly and cleanly, leaving no mark on your walls. Look forward to the next hanging project you have in mind, knowing these strips are ready to help you display your pieces with confidence and ease.
